Services – Getting Started & Next Steps

Can I Still Change My Roof? You home or cabin probably needs a new roof, and that is probably the reason why you are reading this article. Can I still install a metal roof even if my house is old? If you were able to have sufficient knowledge about roof installation, then most probably, you can install your own metal roof. First and foremost, if you want to install a metal roof, the first thing that you have to do is to choose the right material. The materials that you should choose should be compatible and appropriate to your existing roof’s pitch, framing and metal roof panels or else the installation of roof would be difficult, so , some of the materials needed are; hardware, flashing and decking. Having a detailed drawing before you go to purchase the materials to do the job will help you know what hardware you need along with the number of roofing panels. However, you need to install furring strips and asphalt paper between the existing and new roofing materials because there are cases where the new roofing installation are being installed on top of the existing roofing materials. Assembling the correct tools beforehand will help you secure that all the tool that you have will do the job properly and safely. It is also very important that you read and follow the manufacturer’s instructions for installation carefully before starting the job.
The Ultimate Guide to Options
To make sure that there is good drainage from your roof you will need to determine the pitch of your existing roof decking. You really have to check your existing roof decking since every metal roof has different variations and designs, hence, their roof pitch requirements are also different from each other. Your roof needs to have a pitch first before you can select a design for a particular pitch. Your roof must be watertight, so if ever your roof is low, you need to get yourself an additional sealant and hardware. Metal roofing installation can be used with internal or external fasteners but it is easier to use the external fasteners. The type of flashing, trims and fasteners that will going to be used depends on the kind of roofing panel that you will choose.
Overwhelmed by the Complexity of Options? This May Help
Eye protection, fastening tools, small hand-held metal snips for cutting around obstructions, carbide blade good for metal cutting, power saw, nibbler attachment for your cordless drill to cut across panels, dedicated impact driver for large roofing job, a cordless drill that has fastener attachment for small roofing job and gloves with a good grip are the materials that you will need if you want to install metal roofing.